
Clean, fast spray foam removal with no chemicals and no mess
Dry Ice Blasting Spray Foam Removal in Scarborough
Dry Ice Blasting Spray Foam Removal in Scarborough is the fastest way to strip failed foam from lofts, rafters and cavity walls without chemicals or water. We handle open cell and closed cell foam, including Icynene and Lapolla, on residential and commercial jobs across North Yorkshire. If your mortgage lender has flagged spray foam, or you need a loft cleared before a sale, we can usually quote the same day.
What's included
What's Included in Dry Ice Blasting Spray Foam Removal
Every job includes the full removal process, from survey to clean-up. Here is what you get as standard, and what we can add on if your property needs it.
Full Property Survey
We inspect the foam, check the timbers underneath and confirm the foam type before quoting. You get a written price the same day in most cases, with no hidden extras and no obligation to book.
Dry Ice Blasting Removal
Complete removal of spray foam from rafters, purlins, roof felt and accessible surfaces using our dry ice blasting machine. We work in controlled passes and vacuum debris at source to keep dust out of your home.
Industrial Vacuum and Air Scrubbing
An industrial vacuum and air scrubber run throughout the job to capture foam particles and dust. Negative air pressure keeps the work zone sealed, so the rest of your property stays clean while we work.
Hand Tool Detail Work
After blasting, we use hand scrapers and an oscillating multi-tool to clear edges, corners and areas around cables and pipework. Every rafter is checked by hand before we sign the job off.
Debris Bagging and Disposal
All foam debris is bagged in disposal bags and removed from site. We dispose of it responsibly in line with COSHH requirements, so you do not have to arrange waste collection or worry about where it goes.
Photographic Report
You receive photographs of the cleared timbers and a written summary of the work, suitable for lenders, surveyors and valuers. If your mortgage has been held up by spray foam, this documentation is usually what unblocks it.
Service overview
Dry Ice Blasting Spray Foam Removal in Scarborough
Dry Ice Blasting Spray Foam Removal in Scarborough uses compressed dry ice pellets fired at supersonic speed to shatter and lift cured spray foam from timber, brick and steel. The pellets hit the foam, cause it to embrittle and crack, and the blasting pressure peels it away without gouging the substrate. We pair the dry ice blasting machine with an industrial vacuum and air scrubber so dust and debris are captured at source. No water, no solvents, no chemical residue left behind in your loft.
Most Scarborough jobs we see involve spray foam that was installed years ago and has since shrunk, cracked or trapped moisture against roof timbers. Coastal properties from South Cliff to Cayton take the worst of it, because salt air and driving rain push damp into roofs that cannot breathe. If you are searching for dry ice blasting Scarborough North Yorkshire cost, the honest answer is that it depends on foam type and coverage. We survey first, then price the job properly.
The service timeline
How Our Dry Ice Blasting Process Works
The process flexes to the condition, but these checkpoints keep decisions clear.
Survey and Quote
We visit your property, inspect the foam and check the timbers underneath. You get a written price the same day in most cases, with no hidden extras. We identify whether you have open cell or closed cell foam, note any cables or pipework, and confirm access arrangements before we book the job in.
Site Protection
On arrival we lay protective sheeting, seal doorways and set up the industrial vacuum and air scrubber. Negative air pressure keeps dust inside the work zone. We mask vents and light fittings, and we walk you through the plan before any blasting starts. Setup usually takes 45 to 60 minutes on a standard loft.
Dry Ice Blasting
Our technician feeds dry ice pellets into the blasting machine and works across the foam in controlled passes. The foam shatters on impact and is drawn straight into the vacuum. A three-bedroom loft typically takes four to eight hours of blasting, depending on foam thickness and how well it has bonded to the timber.
Detail and Inspection
Once the bulk is off, we switch to hand scrapers and an oscillating multi-tool for edges, corners and around cables. Every rafter is checked by hand. If we find rot, we flag it and photograph it for your records. This stage is where a rushed job shows, so we take the time to get it right.
Clean-Up and Handover
We bag all debris in disposal bags, vacuum the area again and remove our sheeting. You get a walkthrough, photographs of the cleared timbers and a written summary for your lender or surveyor. The loft is left clean enough to re-insulate immediately if you want to.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Dry Ice Blasting Machine
The core of our removal process. Fires dry ice pellets at supersonic speed to shatter and lift cured spray foam from timber, brick and steel without chemicals or water.
Industrial Vacuum and Air Scrubber
Captures foam particles and dust at source while we blast. Paired with a negative air machine, it keeps the work zone sealed and the rest of your property dust-free.
Oscillating Multi-Tool
Used for detail work around cables, pipework and tight corners after the main blasting pass. Lets us clear foam precisely without cutting into timbers or services.
Reciprocating Saw and Spray Foam Removal Saw
For thick closed cell foam that has cured rock-hard. We use these sparingly and only where blasting alone is too slow, always with the substrate checked first.
Hand Scrapers and Protective Clothing
Final detail work and technician safety. Every rafter is checked by hand, and our team wears protective clothing and respirator filters throughout the job.
Disposal Bags and Containment Sheeting
Keeps foam debris contained and your property protected. All waste is bagged and removed from site in line with COSHH requirements.
Use cases
When You Need Dry Ice Blasting Spray Foam Removal
These examples show how the service framework adapts rather than forcing every call through one repair.

Rental Loft Clearance in Falsgrave
A landlord had two rental lofts with open cell foam that was trapping moisture and causing complaints from tenants about damp smells. Both properties needed clearing between tenancies with minimal downtime. → We removed the foam from both lofts over a single weekend using dry ice blasting. Debris was bagged and removed, and both lofts were photographed and signed off. The properties were re-let within three weeks.
Commercial Roof Deck in Eastfield
A commercial unit near Eastfield had spray foam across a large roof deck that was causing damp and failing inspections. The business could not afford a full shutdown, so the work had to be phased. → We cleared the roof deck in four phases using dry ice blasting and industrial vacuums, keeping the unit trading throughout. Each section was signed off before we moved on, and the unit passed inspection with no shutdown.
Problems we solve
Spray Foam Problems We Fix in Scarborough
Spray foam causes more problems than most homeowners realise. Here are the ones we see most often on the North Yorkshire coast, and how dry ice blasting solves them.
Mortgage refused due to spray foam
We remove the foam with dry ice blasting, photograph the cleared timbers and provide a written report your lender will accept. Most clients see their mortgage condition resolved within a week of the removal being completed.
Roof timber rot from trapped moisture
Dry ice blasting lifts the foam without adding water or chemicals, so the timbers can dry out naturally. We inspect every rafter by hand, flag any rot early and document it for your records before it spreads further.
Difficulty selling a house with spray foam
We clear the foam, restore airflow and give you the paperwork buyers and their solicitors want. A clean, documented loft removes the main objection and lets the sale proceed at a normal pace.
Spray foam covering electrical cables
Our technicians use hand tools and an oscillating multi-tool around cables after the main blasting pass, freeing them without cutting into insulation. We photograph the exposed cabling so your electrician can inspect and certify it.
Pricing process
Dry Ice Blasting Spray Foam Removal Costs
1,200 - 3,500 pounds for residential lofts; 4,000 pounds upwards for commercial roof decks
Foam Type
Open cell foam is softer and comes away quickly with dry ice blasting, so it costs less to remove. Closed cell foam is denser and bonds harder to timber, which takes longer and pushes the price up. We confirm the type during survey.
Coverage Area
The more square metres of foam, the longer the job. A standard three-bedroom loft sits at the lower end of the range, while larger detached roofs or full commercial decks sit at the top. We measure during survey and price accordingly.
Access and Height
Difficult access, steep roofs or lofts with limited headroom slow the work down. We use PASMA-trained technicians and safe working at height procedures, which may add to the cost on complex jobs.
How much is Dry Ice Blasting Spray Foam Removal in Scarborough?
Most residential lofts in Scarborough cost between 1,200 and 3,500 pounds, depending on foam type, coverage and access. A standard three-bedroom semi with open cell foam typically sits at the lower end. Closed cell foam, larger roofs or difficult access push the price up. We survey first and give you a fixed written price, so there are no surprises.
Does dry ice blasting work for spray foam in Scarborough North Yorkshire?
Yes. Dry ice blasting removes both open cell and closed cell spray foam from timber, brick and steel without chemicals or water. The pellets embrittle the foam and the blasting pressure lifts it cleanly. On coastal Scarborough properties where foam has trapped moisture against rafters, it is the safest method because it does not drive more damp into the timber.
Who does Dry Ice Blasting Spray Foam Removal near me in Scarborough?
Trueform Spray Foam Service covers all Scarborough neighbourhoods, including Barrowcliff, Falsgrave, Newby, Scalby and Cayton. We have been removing spray foam since 2021 and work with homeowners, landlords, surveyors and lenders across North Yorkshire. Call 0172 326 3029 and we can usually survey your property the same day.
Is Dry Ice Blasting Spray Foam Removal safe in Scarborough?
It is safe when done by trained technicians. Dry ice blasting uses no chemicals, so there are no fumes or solvent residues. We set up negative air pressure, wear protective clothing and respirator filters, and capture all debris with an industrial vacuum. The process does not damage roof timbers or electrical cables when handled correctly, and we check every rafter by hand afterwards.
Ready when you are
Book Dry Ice Blasting Spray Foam Removal in Scarborough
Call Trueform Spray Foam Service on 0172 326 3029 for a same-day survey and a fixed written price. We are CHAS accredited, fully insured and have been removing spray foam across North Yorkshire since 2021.

Talk with the local team
Request Dry Ice Blasting Spray Foam Removal
Ring us on 0172 326 3029 or email [email protected] and we will get back to you the same working day. We cover Scarborough and the surrounding villages, Monday to Friday 8am to 6pm, with an out-of-hours line for emergencies. Free loft assessments, written prices, no pressure.


